Connect to Q-SYS Reflect This Q-SYS Product can be connected to our powerful monitoring and management solution. Start your free trial today! Features & Benefits Rightsized Amplification: Four output channel models at 60 W per channel Flex I/O: Two onboard software-definable flex channels (as mic/line inputs with 48V phantom power, or...
Connect to Q-SYS Reflect This Q-SYS Product can be connected to our powerful monitoring and management solution. Start your free trial today! Features & Benefits Rightsized Amplification: Four output channel models at 60 W per channel Flex I/O: Two onboard software-definable flex channels (as mic/line inputs with 48V phantom power, or...
Features Up to 60 watts per channel into 4 and 8 ohms — The outputs of the SPA2-60 and SPA4-60 are designed to provide 60 watts per channel into Low-Z loads ENERGY STAR® qualified amplifier — The SPA2-60 and SPA4-60 are EnergyStar qualified amplifiers; efficient class-D amplifiers that conserve energy and require no active cooling, so...
Features Up to 200 watts per channel into 4 and 8 ohms — the outputs of the SPA4-100 model are designed to provide up to 100 watts per channel into Low-Z loads. ENERGY STAR® qualified amplifier - The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost. Bridgeable outputs...
Features Up to 60 watts per channel into 4 and 8 ohms — The outputs of the SPA2-60 and SPA4-60 are designed to provide 60 watts per channel into Low-Z loads ENERGY STAR® qualified amplifier — The SPA2-60 and SPA4-60 are EnergyStar qualified amplifiers; efficient class-D amplifiers that conserve energy and require no active cooling, so...
Features Up to 200 watts per channel into 4 and 8 ohms — the outputs of the SPA2-200 model are designed to provide up to 200 watts per channel into Low-Z loads. ENERGY STAR® qualified amplifier — The ENERGY STAR qualified SPA amplifiers employ an efficient class-D design to conserve energy and reduce operational cost. Bridgeable outputs...
Features High output performance with 800 W/1600 W continuous power rating Eight built-in M10 mounting points for overhead suspension 15 mm plywood construction for increased cabinet structural integrity 4 ohm impedance for efficient amplifier power Side mounted hand holds for easy handling during installation Foam-lined perforated...
Features High performance for medium to large cinemas Directivity Matched Transition ® (DMT) provides balanced sound between woofer and horn Axisymmetric horn 10-inch (254 mm) woofer with 2" (50 mm) voice coil 1.4-inch (35 mm) titanium diaphragm compression driver Pre-installed speaker-side mounting hardware for fast, easy, and secure...
Features Optimized for cinema applications Requires less than 17 inches (432 mm) behind screen Two 18-inch (456 mm) woofers with 4-inch (100 mm) voice coils Screw-type barrier-strip connectors Specifications SB-2180 Frequency Range 1 (-10dB) 25 Hz to 150 Hz Rated Noise Power (Voltage) 2 1100 W Sensitivity 3 100 dB Maximum continuous SPL...
The SB-218F enclosure features separate chambers for each transducer. In the rare event of a transducer failure, this prevents over-excursion of the remaining transducer caused by improper box loading. Both models feature 4 ohm impedance, which means that you can use a smaller amplifier to get maximum output from the loudspeaker....
