Features SB-7118 features a 750 W, 18-inch transducer Frequency range extends to below 25 Hz when used with the correct B6 filter DCM and SF-3 signal processors optionally available Enclosures feature vandal-resistant woofer mounting bolts SPECIFICATIONS SB-7118 Frequency Range 1 (-6 dB, Half space) (-10 dB, Half space) 22–100 Hz...
Features SB-7218 features dual 700-watt transducers Frequency range extends to below 25 Hz when used with the correct B6 filter DCM and SF-3 signal processors optionally available Enclosures feature vandal-resistant woofer mounting bolts SPECIFICATIONS SB-7218 Frequency Range 1 (-6 dB, Half space) (-10 dB, Half space) 22–100 Hz...
Features High performance in a small package Directivity Matched Transition ® (DMT) provides balanced sound between woofer and horn 8" (200 mm) woofer with 2" (50 mm) voice coil 1.4" (35 mm) titanium diaphragm compression driver Pre-installed speaker-side mounting hardware for fast, easy, and secure installation. Use with QM-SW or QM-BW...
This product has been discontinued. Please check with your Q-SYS regional sales representative for remaining stock availability. Consider the Q-SYS QIO Series network mic/line expanders as a replacement: The QIO Series of network audio I/O expanders enable interoperability with non-networked audio endpoints to expand the power of Q-SYS...
Features High Performance for immersive surround applications 15-inch (380 mm) woofer with 3-inch (76 mm) voice coil 3-inch voice coil (76 mm) coaxially-mounted high frequency driver Pre-installed speaker-side mounting hardware for fast, easy, and secure installation. Use with QM-SW or QM-BW for wall mounting (sold separately). Very...
Features Optimized design for small room cinema applications Requires less than 12 inches (305 mm) behind screen 18-inch (457 mm) woofer with 4 -inch (102 mm) voice coil Screw-type barrier-strip connectors SPECIFICATIONS SB-1180 Frequency Range 1 (-10 dB) 29 Hz to 170 Hz Rated Noise Power 2 600 W Sensitivity 3 98 dB Maximum...
Features Dual 8 -inch polypropylene cone woofers Large port area for extended low-frequency performance Dual-chamber ported bandpass cabinet Defeatable passive 120 Hz low-pass filter with impedance compensation 250 watts continuous power handling, 700 watts peak 70/100 V multitap transformer with 8 ohm bypass Yoke mount and flying...
Features 12 -inch weather treated woofer TFR™ (Turbulent Flow Reduction) port provides optimal resonant tuning and high velocity air flow Maximum peak SPL 121 dB Suggested filter points: 32 Hz high-pass, 24 dB/octave Butterworth; 100 Hz low-pass, 24 dB/octave Butterworth Included YMS12 yoke mount maximizes boundary plane coupling while...
Features 5.25 inch weather treated woofer; 1 inch silk dome tweeter 115° conical coverage 60 watt low-saturation and low-loss 70/100V transformers with 8Ω bypass Maximum peak SPL 116 dB (8 ohm bypass) Directivity Matched Transition ® (DMT) ensures smooth, uniform frequency response over the coverage area X-Mount™ system enables the...
Features & Benefits Eight (8) output channels at 250 W per channel Lo-Z, Hi-Z, 70 V and 100 V direct drive available on all channels (no bridging or manual switches required) Eight (8) analog, line-level audio inputs, fully routable into Q-SYS or direct out Two (2) gigabit Ethernet ports for redundant networked audio Standalone mode...