Features & Benefits Eight (8) output channels at 250 W per channel Lo-Z, Hi-Z, 70 V and 100 V direct drive available on all channels (no bridging or manual switches required) Eight (8) analog, line-level audio inputs, fully routable into Q-SYS or direct out Two (2) gigabit Ethernet ports for redundant networked audio Standalone mode...

Key Features Monitor up to 32 Dante network audio channels in two modes: Standard: Monitor any of the 32 channels assigned to the Dante/AES67 receiver inputs Extended: Subscription-based monitoring of up to 128 Dante/AES67 channels loaded to the DM1 (managed via unIFY Control Panel Software). Local audio input channels provide on-ramps...

Features SB-7118 features a 750 W, 18-inch transducer Frequency range extends to below 25 Hz when used with the correct B6 filter DCM and SF-3 signal processors optionally available Enclosures feature vandal-resistant woofer mounting bolts   SPECIFICATIONS   SB-7118 Frequency Range 1 (-6 dB, Half space) (-10 dB, Half space) 22–100 Hz...

Features SB-7218 features dual 700-watt transducers Frequency range extends to below 25 Hz when used with the correct B6 filter DCM and SF-3 signal processors optionally available Enclosures feature vandal-resistant woofer mounting bolts   SPECIFICATIONS   SB-7218 Frequency Range 1 (-6 dB, Half space) (-10 dB, Half space) 22–100 Hz...

Features High performance in a small package Directivity Matched Transition ® (DMT) provides balanced sound between woofer and horn 8" (200 mm) woofer with 2" (50 mm) voice coil 1.4" (35 mm) titanium diaphragm compression driver Pre-installed speaker-side mounting hardware for fast, easy, and secure installation. Use with QM-SW or QM-BW...

Features Consistent tonal characteristics across the entire AcousticDesign family in surface, ceiling, and pendant applications Directivity Matched Transition ® (DMT) waveguide ensures smooth, uniform frequency response over the coverage area Snap-fit magnetic grille 2x quick-link suspension cables and slip-lock fasteners provided...

Features High quality transducers provide exceptional clarity through the critical voice range. Improved musicality often not seen in typical BGM class products. Ported baffle for increased low frequency extension down to 70 Hz. Low saturation 70/100V transformers with 8 ohm bypass. 4-pole Euroblock connector eases system wiring....

Features Studio reference-quality loudspeaker system Part of the Reference Monitor System, including matched RSB-212 subwoofer, signal processing, and amplification Optimized for use behind a perforated screen Directivity Matched Transition ® (DMT) ensures smooth, coherent power response throughout the listening area 90° axisymmetric...

Features & Benefits Four (4) output channels at 250 W per channel Lo-Z, Hi-Z, 70 V and 100 V direct drive available on all channels (no bridging or manual switches required) Four (4) analog, line-level audio inputs, fully routable into Q-SYS or direct out Two (2) gigabit Ethernet ports for redundant networked audio Standalone mode...

Features & Benefits Four (4) output channels at 500 W per channel Lo-Z, Hi-Z, 70 V and 100 V direct drive available on all channels (no bridging or manual switches required) Four (4) analog, line-level audio inputs, fully routable into Q-SYS or direct out Two (2) gigabit Ethernet ports for redundant networked audio Standalone mode...