CXD8.4Qn
Networked Amplifier (with network connectivity only) - Available Fall 2017
Stromversorgung
CXD8.4Q / CXD8.4Qn | CXD8.8Q / CXD8.8Qn | ||||
Maximale Leistung | Continuous Power | Maximale Leistung | Continuous Power | ||
8 Independent Channels A, B, C, D, E, F, G, H | 70 V | 500 W | 300 W | 850 W | 600 W |
100 V | 500 W | 300 W | 850 W | 600 W | |
8 Ω | 500 W | 300 W | 850 W | 600 W | |
4 Ω | 500 W | 300 W | 1000 W | 600 W | |
2 Ω | 500 W | 300 W | 600 W | 300 W | |
2 Channels Combined in BTL Bridge A+B or C+D or E+F or G+H Doubles Voltage | 8 Ω | 1000 W | 600 W | 2000 W | 1200 W |
4 Ω | NE* | NE* | NE* | NE* | |
2 Ω | NE* | NE* | NE* | NE* | |
2 Channels Combined in Parallel AB or CD or EF or GH Doubles Current | 8 Ω | 1000 W | 600 W | 1100 W | 1100 W |
4 Ω | 1000 W | 600 W | 1800 W | 1200 W | |
2 Ω | 1000 W | 600 W | 2000 W | 600 W | |
3CH Combined in Parallel ABC or EFG Triples Current | 8 Ω | 1000 W | 900 W | 1100 W | 1100 W |
4 Ω | 1500 W | 900 W | 1800 W | 1800 W | |
2 Ω | 1500 W | 900 W | 2800 W | 1800 W | |
4CH Combined in Bridged/Parallel AB+CD Doubles Current and Voltage | 8 Ω | 2000 W | 1200 W | 3600 W | 2400 W |
4 Ω | 2000 W | 1200 W | 4500 W | 2400 W | |
2 Ω | NE* | NE* | NE* | NE* | |
4CH Combined in Parallel ABCD or EFGH Quadruples Current | 8 Ω | 1200 W | 1200 W | 1200 W | 1200 W |
4 Ω | 2000 W | 1200 W | 2200 W | 2200 W | |
2 Ω | 2000 W | 1200 W | 4000 W | 2400 W |
NE* = Wegen hoher Stromaufnahme nicht empfohlen
BOLD = Optimal configuration for the load and channel count
Allgemeine technische Daten
CXD8.4Q | CXD8.4Qn | CXD8.8Q | CXD8.8Qn | |
Typical distortion 8Ω 4Ω | 0.02–0.05% 0.04–0.1% | |||
Maximum distortion (4Ω-8Ω) | 1.00% | |||
Frequency response (8Ω) | 20 Hz–20 kHz ±0.3 dB | |||
Noise Unweighted Output Muted Weighted Output Muted | -101 dB -104 dB | |||
Gain (1.2V setting) | 38.4 dB | |||
Dämpfungsfaktor | >100 | |||
Eingangsimpedanz | >8k balanced and >4k unbalanced | |||
Input Sensitivity Continuously variable: Vrms dBu dBv | 1.23mV to 17.35V -56 to 27 -58.2 to 24.8 | |||
Verstärker- und Überlastschutz | Short circuit, open circuit, thermal, RF protection. on/off muting, DC fault shutdown, active inrush limiting | |||
AC-Stromversorgung | Universal Power Supply 100–240 VAC, 50–60 Hz | |||
Zertifikate | UL, CE, RoHS/WEEE compliant, FCC Class A (conducted and radiated emissions) | |||
Inhalt der Verpackung | IEC Cable, Quick Start Guide, Phoenix Connectors |
Burst Power- 20 ms 1 kHz sine burst, all channels driven
Continuous Power- EIA 1 kHz 1% THD, all channels driven
Bedienelemente, Anzeigen und Anschlüsse
CXD8.4Q | CXD8.4Qn | CXD8.8Q | CXD8.8Qn | |
Controls and indicators (front) | Power • Channel MUTE Buttons • Control knob • Channel SELECT buttons • Channel output and LIMIT LED meters • NEXT, PREV, ID Buttons • Channel input signal and CLIP LED indicators | |||
Controls and indicators (rear) | AC power disconnect | |||
Eingänge | 3-pin Phoenix and Q-LAN Network connectivity | Q-LAN Network connectivity only | ||
Ausgänge | 8-pin Phoenix |
Gewicht und Abmessungen
CXD8.4Q / CXD8.4Qn | CXD8.8Q / CXD8.8Qn | |
Abmessungen (H x B x T) | 3,5 × 19 × 16 | 3,5 × 19 × 16 |
Abmessungen (H x B x T) | 89 × 482 × 406 | 89 × 482 × 406 |
Gewicht ohne Verpackung | 11,3 kg (25 lb) | 11,8 kg (26 lb) |
Versandgewicht | 13,2 kg (29 lb) | 30 lb / 13.6 kg |
Änderungen der Technischen Daten jederzeit ohne Vorankündigung möglich.